Ice machine manufacturers teach you how to maintain the cube ice machine to extend its service life.

1. The cube ice machine should be installed away from heat sources, without direct sunlight, and in a well-ventilated place.

2. The ground where the ice machine is installed should be solid and flat, and the ice machine must be kept level, otherwise it will cause the ice to not come off 

and make noise during operation.

3. The gap between the back and the left and right sides of the ice making machine should be no less than 30cm, and the gap at the top should be no less than 

60cm.

4. The water used by the ice machine must comply with the national drinking water regulations, and a water filtering device should be installed to filter impurities 

in the water to prevent blocking the water pipes and contaminating the sink and ice molds. And affect the ice making function.

5. When cleaning the ice machine, the power should be turned off. It is forbidden to flush the ice machine directly with a water pipe. Use neutral detergent to 

scrub. It is forbidden to clean it with acidic, alkaline and other corrosive solvents.

6. The ice machine must clean the dust on the condenser surface every month. Poor condensation and heat dissipation will cause damage to the compressor 

components.

Zhengzhou Baopin Machinery provides you with high-quality cube ice machines, pellet ice machines, flake ice machines, block ice machines, tube ice machines, 

etc. Our reliability comes from the innovation and continuous efforts of our R&D team to produce a full range of products and ensure stable quality, as well as a 

complete after-sales service system, and do ODM OEM ice machine service.