We usually use the ice machine more frequently in the summer, but in winter, the utilization rate of the ice machine decreases. All in the season when the ice machine is used less, 

we can perform a complete maintenance on the ice machine.

After the ice machine is turned off and powered off every day, a brief inspection of the equipment is performed, and an equipment inspection is also required before the ice machine

 is turned on for ice making operations.

The detailed steps are as follows:

1. Check whether the water supply pipe of the ice machine is folded and twisted. If so, straighten the water pipe. If this problem is not solved properly, it may affect the ice production

of the ice machine. If the water volume or water pressure is too low, the ice production of the ice machine will be reduced.

2. Ensure the water quality of the ice machine's water supply. Most of the ice machine problems are caused by water. The water must be clean and free of impurities.

3. Check the ice machine's power system, such as wires and sockets, to ensure that the power system is in a normal state before starting the ice machine.

4. If the ice machine makes an abnormally loud noise while producing ice cubes, you should immediately stop the machine, disconnect the power, and inspect the ice machine to find

out where the problem lies.

Before the ice machine is operated, sufficient inspection and preparation work should be done on the ice machine before starting equipment production, which can greatly reduce 

the failure rate of the ice machine.

Baopin Machinery is a manufacturer specializing in the production of ice machines. Our main products include cube ice machines, flake ice machines, pellet ice machines, block ice 

machines, snowflake ice machines, tube ice machines, ice cream machines, etc. For any ice making machine needs, please contact us and we will give you professional advice.