1. Flake ice machine Installation address requirements

First of all, site selection is the key to installing an ice machine. The ice machine should be installed in a dry and ventilated place indoors, away from high temperature and high humidity environments.

2. Preparation work before installation of flake ice machine

Before installing the ice machine, you need to complete the following preparations:

Make sure the ice machine’s power supply complies with the local voltage, frequency and phase number;

Check the completeness and correctness of all installed components;

Prepare necessary tools, such as wrenches, screwdrivers, etc.

3. Ice maker machine installation steps

1. Install the ice machine's bracket: Place the ice machine's bracket on the selected floor and use a level to adjust the bracket's level.

2. Install the water supply and drain lines: Connect the ice machine's water supply and drain lines to the solution.

3. Install the condenser and cold air pipe: Lead the condenser and cold air pipe from the ice machine and fix them on the bracket.

4. Connect the power cord: Connect the power cord to the ice machine power outlet and check that the connection is secure.

5. Turn on the ice machine switch: After the above steps, the last step is to turn on the ice machine switch and perform a power test run to ensure the normal operation of the ice machine.

It should be noted that during the installation process of the ice machine, ensure correct operation, do not damage the surface and internal structure of the equipment, and do not disassemble the equipment arbitrarily to avoid affecting the use effect. Any need,please contact Baopin machinery after-sale engineer.